Fasteners / Accessories

Primatech 2" T Hardwood Flooring Cleats - 16 Ga. Steel - "T" Shaped - Box of 10000


In stock

2" "T" Floor Cleats / Nails - 16 Ga. Steel - Primatech C024 or Primatech C022 - Box of 10000



Primatech 2 Inch "T" Floor Cleats / Nails - 16 Ga. Steel - "T" Shaped - Box Of 10000

Primatech T-Shaped Steel cleats / nails are used for the installation of hardwood flooring and can be used in many makes of both manual and pneumatic floor nailers. Designed with collated tape, the nails hold together and waste and breakup is minimized. The sharp tips and barbed edges make allow for effective penetration and tongue split prevention, providing the correct amount of holding power. The resin coating adds subfloor retention strength and ensures the maximum hold when installing tongue and groove floors. Primatech cleats are proudly made in Canada. 

Please note: Coverage for cleats depends on board size, cleat spacing, and product manufacturers' recommendations. Cleats are Non-Returnable. Please compute nails necessary for the project prior to ordering. 

 •  Collated Tape eliminates breakup and waste
 •  Resin coated for additional subfloor retention strength
 •  Pack Quantity is 10,000
 •  Compatible with Primatech Models 250AT, 250FT, 245FT, 240FT, 210FT, 330T, and 300T
 •  Can also be used an many standard flooring nailers which use 16 Ga. T Cleats - Consult your owner's manual
 •  In-Stock and Ready to Ship


Comparable to: Porta-Nails 42629

Please check your tool's owner's manual to ensure compatiblity and correct ordering. 


Additional Information

Length 2"
Gauge 16
Material Steel
Box Quantity 10000
Application 1/2" to 33/32" Tongue and Groove Flooring
Comparable To: Porta-Nails 42629
Primatech Number C024 or C022
Country of Manufacture Canada